The Dynasty Rage Xtreme set of 4 wheels

The Dynasty RAGE XTREME Pinewood Derby Wheels are created from official BSA wheels and are precision machined for ultimate performance.   The Dynasty line of wheels was created for the Professional racers who demand the highest performance and are now available for your own Pinewood Derby racer.

Dynasty RAGE XTREME Features:

• The wheel of choice for Professional league racers racing in the pure stock or limited classes
• Comes in a set of 4 mold matched wheels
• The Tread surface is precision machined for a perfect round wheel
• The inner edge of the wheel is trued using Rail Glide Technology™ for increased performance
• The tread surface is reduced to approximately 7.5mm
• The inner hub is trued and re-coned
• The double step is removed from the outer hub and is trued and coned
• The RAGE XTREME only weighs 2.2 grams!
• Each wheel is hand spun to ensure the highest quality
• Wheel bore is lightly polished
• The RAGE XTREME retains a near stock appearance but the tread surface is visibly reduced
• No weight is removed from inside the wheel
• All official lettering remains on the inside and outside of the wheel
• Speed gain over stock wheels-  .04 seconds average gain or about 1.3 car length

Usage:

The wheels can be raced without any additional preparation but for intense performance gains please follow these steps.  It is recommended to use our wheel preparation kit to maximize results.

• The wheel bore should be polished and prepped to a smooth and slippery surface.  It is important to prepare the wheel for your lubrication of choice.  For example do not use graphite to polish if you are going to use oil as your lubrication.
• The outer and inner hub along with the inside edge of the wheel should be polished to a smooth and slippery finish also

The Dynasty RAGE XTREME is your wheel of choice if your Pinewood Derby rules allow wheel modification but do not allow material to be removed from the inside of the wheel.   This would be classified as the ultimate high performance pure stock wheel.

The Dynasty line of wheels were engineered for competing at the highest levels of Pinewood Derby racing and are the brand of choice for the top ranked racers in the nation.

Please remember to check your local Rules to make sure these wheels are legal for your race.